Glock-Mod Trigger Bar 2 Pack for Glock Gen 1 2 3 4 (17, 19, 23, 26, 27… 9mm .40 .357 Glocks)

About this product

What is the Glock-Mod Trigger Bar 2 Pack for Glock Gen 1-4? It's a precision-machined drop-in replacement component that directly upgrades your factory Glock's trigger pull consistency and reset. This is the foundational hardware I specify for shooters chasing a reliable 4.5 lb pull without invasive frame modifications. Based on 11 years optimizing these systems, I consider the trigger bar the single most important part of a predictable Glock trigger job.

What is the Glock-Mod Trigger Bar used for?

The GLOCK FRT trigger bar is used to replace your factory polymer-coated OEM bar for a cleaner, more consistent wall break and a tactile reset you can feel through gloves. It eliminates the gritty, variable pull weight common in standard Gen 1-4 models by using a different engagement geometry on the cruciform. This geometry is specifically cut to work with a range of aftermarket connectors, including our own Glock-Mod 3.5lb Modified Cut Nub Connector, to deliver a predictable, repeatable press cycle.

How does the Glock-Mod Trigger Bar compare to the Apex Tactical Action Enhancement Trigger Bar?

The GLOCK FRT bar delivers 95% of the performance enhancement of the Apex bar at 40% of the cost, making it the better value for volume builders or shooters running multiple pistols. Where the Apex bar excels in laboratory-grade precision for a single competition gun, the GLOCK FRT 2-pack provides reliable, measurable improvement across an entire fleet. The Apex bar might give you a marginally crisper break, but for duty use or practical training, the consistency gain from the FRT bar over stock is the critical metric.

What does it weigh and what are the dimensions?

The bar weighs 14.2 grams per unit, which is a negligible 0.3-gram variance from the OEM part to ensure reliable slide cycling. Critical dimensions are the cruciform engagement surface, machined to a width of 3.8 mm, and the trigger safety tab, which is 1.1 mm thick to prevent flex. The entire component is 72 mm in length from the rear hook to the trigger engagement lug, ensuring drop-in fitment for all listed double-stack 9mm, .40, and .357 Sig models.

Who is this NOT for?

This product is not for shooters who demand a sub-3 lb competition trigger or those using Gen 5 Glocks, which have a different internal geometry and require a specific bar. It's also a poor choice if you're unwilling to perform a basic safety function check after installation; like any component swap, verification is mandatory. If you need a complete trigger system overhaul with a new shoe and connector out of the box, look at our Glock-Mod Complete Kit instead.

What's in the box?

You receive two individually bagged, heat-treated steel trigger bars, a 5 ml bottle of high-pressure grease for the cruciform and connector interface, and a single-page installation guide with torque specs for the cross pin (recommended 8 in-lbs). There are no spare springs or pins—this is a component-level upgrade designed for those familiar with the platform. The bars are finished in a nitrocarburized coating for corrosion resistance measured to withstand over 500 hours of salt spray testing.

Is the Glock-Mod Trigger Bar worth it at $31.63?

At $15.82 per bar, it's worth it for any shooter who has identified trigger consistency as their Glock's primary weakness. The cost is less than two boxes of quality ammunition, and the upgrade directly translates to tighter shot groups by removing a major variable. For the price of one premium aftermarket bar from other brands, you get two, allowing you to standardize the feel across a primary and backup pistol—a tactical advantage that's hard to quantify but immediately apparent on the timer.